Distiller Assembly Instructions
Fruit and Vegetable Based Mash
Misinformation About Distilled Water
Preparing Grain Worts or Mashes
Starter Kits, Accessories, and Supplies
Using Your Still to Make Flower Essences
Pocket knife, bowie, tactical, survival, hunting knives, swords
|
Towers |
| You can mix and match a tower and a boiler to get exactly what you want. If you didn't find the combination of distilling column and boiler in the "Complete Distillers" page, get a tower of your choice, and add a boiler of your choice from "boilers" page, and you are good to go. Make sure to match up the diameters of the column and boiler's flange opening. We have many choices of connectors as well, to attach towers to drums and water heaters. |
 24"Tall 3" diameter This distiller tower comes complete with a quick-release connector, which fits on a standard stainless steel keg or my 26-qt or 32-qt boilers and Milk Cans , a digital thermometer, and a rubber bung.Comes with an extra O-ring gasket (total of TWO).3” Diameter tower is reduced to 2” flange at the bottom of the tower. And will fit a standard keg. Test results 11/2 gallon an hour at 70% using racshing rings for tower packing. |
 |
'MONSTER' Tower PLUS 'MONSTER' Tower PLUS features a stainless steel 3"-diameter, 40"-tall column with a stainless steel screen gasket for full access.Same as the 'MONSTER' but with a bigger condenser to accommodate the boilers with faster/higher output. It comes with a 3" clamp, a digital thermometer and a rubber bung. Can be mounted on a 40-qt stainless steel boiler, on other stainless steel boilers or on a Sankey-type (standard US 8-gallon or 16-gallon) beer keg WITH USE OF A SPECIAL CONNECTOR or on a drum WITH USE OF A SPECIAL CONNECTOR. One 3"-diameter screened gasket is included. See how 'MONSTER' connects to a keg. See how 'MONSTER' connects to a drum. |
Price:$307.77 | ||||
 |
'MONSTER' Stainless Steel Distiller Tower 'MONSTER' tower features a 3"-diameter, 40"-tall column with a stainless steel screen gasket for full access. It comes with a 3" clamp, a digital thermometer and a rubber bung. Can be mounted on a 40-qt stainless steel boiler, or on other stainless steel boilers or on a Sankey-type (standard US 8-gallon or 16-gallon) beer keg WITH USE OF A SPECIAL CONNECTOR. One 3"-diameter screened gasket is included. |
Price:$277.77 |
|
|||
 |
41" 2-in-1 Stainless Steel Distiller Tower 2-in-1 Distiller Tower as a Pot Still2-in-1 Distiller Tower as a Reflux Still Most versatile tower ever made. Use it as a pot still or as a reflux still. Can be mounted on stainless steel boilers or on a Sankey-type (standard US 8-gallon or 16-gallon) beer keg. |
Price:$237.77 |
|
|||
 |
40" Stainless Steel Distiller Tower This distiller tower can be used to distill water to vinegars to essential oils. It can make alcohol up to 95% - 190 proof, also known as moonshine, if it is legal in your country. This distiller tower comes complete with a rubber bung, a quick-release connector, which fits on a standard stainless steel keg, and a digital thermometer. The column is 40 inches tall. Comes with an extra O-ring gasket (total of TWO). |
Price:$197.77 |
|
|||
 |
30" Stainless Steel Distiller Tower This distiller tower comes complete with a rubber bung, quick-release connector, which fits on a standard stainless steel keg, and a digital thermometer. The column is 30 inches tall. Comes with an extra O-ring gasket (total of TWO).This distiller tower works great as a reflux and a pot still. If using as a pot still, simply use no packing and only run the water through the condenser. |
Price:$187.77 |
Add a hose package
|
|||
 |
Pot Still Head - Stainless Steel This distiller tower comes complete with a quick-release connector, which fits on a standard stainless steel keg or my 26-qt or 32-qt boiler, a digital thermometer, and a rubber bung. The column is 18 inches tall. Comes with an extra O-ring gasket (total of TWO). |
Price:$137.77 |
|
|||
|
Price $227.77 |
Add a hose package Add a starter kit
|