About Ethanol Production

Additional Information

Additives

Alcohol Fuel Tax Credit

Boilers

Books and How To

Connectors

Contact Us

Distiller Assembly Instructions

Distilling The Wash

Distilling Water

Essences

Ethanol Stills

Fermenting

Flavoring

Fruit and Vegetable Based Mash

Grains

Heat Sources

Hose Assembly

Hose Kits

Misinformation About Distilled Water

Moonshine Still Products

Oak Barrels

Oaking Agents

Parts

Preparing a Sugar Wash

Preparing Grain Worts or Mashes

Shipping and Handling Charges

Starter Kits, Accessories, and Supplies

Survival Water

Thermometers and Bungs

Towers

Turbo Yeast

Using Your Still to Make Flower Essences

What Is A Reflux Still

Pocket knife, bowie, tactical, survival, hunting knives, swords

Cherokee Angel

Connectors

 

Jump to Gaskets and O-Rings                                                                                                                            
Connector

Stainless Steel 3" to Drum Connector

Connecter for connecting the 'MONSTER' Column to a drum. Made with 100% stainless steel. See how 'MONSTER' connects to a drum.
Price:$53.00

Connector
Stainless Steel 3" to 2" Connector - WITHOUT 2" clamp and gasket
 

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" male NPT fitting on your column.

 

Price:$43.99

Connector

Stainless Steel 3" to 2" Connector - WITH 2" clamp and gasket

Connecter for connecting the 'MONSTER' Column to a keg WITH a 2" clamp and a gasket.
Price:$53.99

Connector

Stainless Steel Hot Water Heater Connector

For those who want to mount my distiller towers on a household hot water heater. If you want to mount two of them to the hot water heater for faster production, you can save a few bucks by buying a 2 pack below. Click on the picture for a larger image.
Price:$43.00

Flange

Stainless Steel Flange / Ferrule with Stainless Steel Screen Assembly - 2" Diameter

For those who want to build their own distiller towers. Click on the picture for a larger image.
Price:$27.00

Flange

Stainless Steel Flange / Ferrule - 2" Diameter

Are you a "do-it-yourselfer"? You think you've got a boiler figured out, but not so sure about the tower? Why not buy my distiller tower and this flange, and put the flange on the boiler of your choice? You got yourself a nice distiller!
Price:$14.00

Flange

Stainless Steel Flange / Ferrule - 3" Diameter

Are you a "do-it-yourselfer"? You think you've got a boiler figured out, but not so sure about the tower? Why not buy my distiller tower and this flange, and put the flange on the boiler of your choice? You got yourself a nice distiller!
Price:$23.00

2" Male NPT to 2" Stainless Ferrule (Tri-clamp)
 

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" female NPT fitting on your column.

 

Price $33.95

2" Female NPT to 2" Stainless Ferrule (Tri-clamp)
 

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" male NPT fitting on your column.

 

Price $46.95

 
Stainless Steel 3" to 2" Connector - WITHOUT 2" clamp and gasket
 

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" male NPT fitting on your column.

 

Price $43.95

 
Stainless Steel 3" to 2" Connector - WITH 2" clamp and gasket
 

Connecter for connecting the 'MONSTER' Column to a keg WITH a 2" clamp and a gasket.

 

Price $53.95

Flange

Stainless Steel Flange / Ferrule - 4" Diameter

Price:$27.00

Clamp

Stainless Steel Clamp - 2" Diameter

Fits on the flange listed above and most U.S. kegs.
Price:$19.00

Clamp

Stainless Steel Clamp - 3" Diameter

Price:$19.00

Clamp

Stainless Steel Clamp - 4" Diameter

Price:$22.00

O-ring for keg

2" Diameter O-ring Gasket (for use on a keg)

To be used with the 2-inch clamp above, when fitted on a keg.
Price:$2.00

O-ring for boiler

2" Diameter Gasket (for use on a boiler)

To be used with the 2-inch clamp above, when fitted on a boiler.
Price:$2.00

 
3" Diameter Gasket (for use on a boiler)
 

To be used with the 3-inch clamp above, when fitted on a boiler.

 

Price $2.00

4-inch Gasket

4" Diameter Gasket (for use on a boiler)

Price:$4.00

O-ring for boiler

2" Diameter Gasket with Stainless Steel Screen

To be used only for "flange to flange" connection, not "flange to keg". If you buy one of my distillers and would like one of these INSTEAD OF the welded post with strainer, please e-mail me and let me know. This gasket with built-in screen will work very well with copper packing.

Ideal for folks who want the easy access to the inside of the column.
Price:$22.99

Screened Gasket

3" Diameter Gasket with Stainless Steel Screen

To be used only for "flange to flange" connection, not "flange to keg". If you are purchasing my 'MONSTER' column, it already comes with one of these. There is no need to buy one separately.

Ideal for folks who want the easy access to the inside of the column.
Price:$28.00

2" Male NPT to 2" Stainless Ferrule (Tri-clamp)

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" female NPT fitting on your column.

 

Price $33.95

2" Female NPT to 2" Stainless Ferrule (Tri-clamp)

Allows you to adapt a copper column to a sankey beer keg or Tri-clamp fitting by using a 2" male NPT fitting on your column.

 

Price $47.95

Rubber Bung for Fermenter Airlock
 

To be used with an airlock on a fermenter lid. Measures 1 5/16" - Top, 1 1/16" - Bottom. Size 6 1/2. #6.5 with hole. Note: This is not the rubber bung for the top of your distiller tower.
 

 

Price $1.99

 
3" Pure Tan Gum Rubber Bung with Hole #11
 

3"Solid rubber stopper. Pre-drilled to fit a digital thermometer.

If you need a bung for a 3"-diameter column, this is it. Please note, this one is pre-drilled to fit a digital thermometer.

 

Price $6.25

 
5LB Pop Style Safety Valve with 3/4" NPT Connector
 

Fits on a standard 55-gallon drum. 3/4" NPT.

 

Price $28.99

 
5LB Pop Style Safety Valve
 

Constructed of brass and stainless steel ball on a brass seat. 1/8" NPT

 

Price $17.99

 
Stainless Steel 3" to Drum Connector
 

Connecter for connecting the 'MONSTER' Column to a drum. Made with 100% stainless steel

 

Price $53.95