Boilers

We offer the milk cans with  2" or  3" ferrules and with a 2" threaded NPT Male. All fitting have a build in stainless steel screen.

3 Gallon Heavy Duty Milk Can with Clamp Down Lid

 New Heavy duty Milk cans with clamp-down lids and silicone gasket. These cans are 100% welded, and with a flat bottom, they can be used on hot plates or propane burners. These cans are just beautiful for distillers or any other purpose. The lids clamp down nice and tight with a silicone gasket and we can weld just about any stainless fitting you'd like on the lids. We also have standard lids with no pre-cut hole. The boiler is made of NSF certified stainless steel

8 Gal (30 liter) Heavy Duty Milk Can w/Clamp Down Lid

New Heavy duty Milk cans with clamp-down lids and silicone gasket. These cans are 100% welded, and with a flat bottom, they can be used on hot plates or propane burners. These cans are just beautiful for distillers or any other purpose. The lids clamp down nice and tight with a silicone gasket and we can weld just about any stainless fitting you'd like on the lids. We also have standard lids with no pre-cut hole. The boiler is made of NSF certified stainless steel.

13 Gal (50 liter) Heavy Duty Milk Can w/Clamp Down Lid

New Heavy duty Milk cans with clamp-down lids. These cans are 100% welded, and with a flat bottom, they can be used on hot plates or propane burners. These cans are just beautiful for distillers or any other purpose. The lids clamp down nice and tight with a silicone gasket and we can weld just about any stainless fitting you'd like on the lids. We also have standard lids with no pre-cut hole. The boiler is made of NSF certified stainless steel.

50-liter (13-gallon) Stainless Steel Milk Can Boiler

50-liter (13-gallon) Stainless Steel Milk Can Boiler -  3" diameter flange. These stainless steel milk cans are specifically made by the manufacturer just for distillers.

The milk can has a large 7" opening for easy cleaning

32 Quart Stainless Steel Boiler - 2in diameter flange

40 Quart Stainless Steel Boiler - 4" diameter flange with reducer to 3"

Made of 13-gauge (extra heavy duty!) stainless steel.

Featuring a whopping 4-inch diameter opening for easy access to the inside of the boiler. It comes equipped with a 4-inch to 3-inch reducer or a 4-inch to 2-inch reducer. Comes with a 4-inch clamp and a 4-inch gasket. Pictured with a 4" to 3" reducer.

13-gauge stainless steel is 0.0897" or 2.2784mm thick. Just for a reference, 13-gauge is about the thickness of a half dollar. 16-gauge is about the thickness of a quarter. 18-gauge is about the thickness of a penny. The boiler is made of NSF certified stainless steel.